US PURIFIED SOIL FROM SLUDGE AS A CATALYST CARRIER

Authors

  • U. Jussipbekov A.B. Bekturov Institute of chemical sciences
  • M. Oshakbaev A.B. Bekturov Institute of chemical sciences
  • A. Utelbayeva A.B. Bekturov Institute of chemical sciences
  • K. Shekeyeva Central Asia university
  • O. Torebekov M. Auezov South Kazakhstan University

Keywords:

hydrogen, toluene, methylcyclohexane, rhodium, nickelcatalyst, polyhydrocomplexe, pillar structure, purificated clay

Abstract

In this article is consideredusing purified clay from oil sludge and utilize it as carrier of catalyst. Purified clay was converted to pillar structural form by polyhydrocomplexes of aluminum chloride and was used to obtain rhodium catalyst containing nickel. Storage the hydrogen in the form of methylcyclohexane was carried outby hydrogenation of toluene in liquid phase at presence of rhodium support catalystwhere as carrier is used pillar structural purified clay. The degree of using an internal surface of porous system is depended.of the size particles.

References

[1] Problems of Ecological Safety of the Republic of Kazakhstan. https: //articlekz.com> Jurisprudence
[2] Djusipbekov U.Zh., Oshakbaev M.T., Utelbayev B.T. Oil sludge and their utilization // Science and World. 2017. Vol. 1, N 12(52).
[3] https://scienceland.info/chemistry8/hydrogen3
[4] Varga, D. Kallo, J. Hancsok // Hungarian Journal of Industrial Chemistry Veszprem. 37 (2009). P. 69-75.
[5] Barbier J., Lamy-Pitara E., Marecot P., Boitiaux J.P., Cosyns J., Verna F. // Adv. Catal. 37(1990). P. 279-286.
[6] Gallezot P. “Catalysis by Zeolites” (B. Imelik, C. Naccache, Y. Ben Taarit, J. C. Vedrine, G. Coudurier, H. Praliaud, Eds.), 5 Elsevier Science, Amsterdam, (1980) 227.
[7] Koussathana M., Vamvouka D., Tsapatsis M., Verykios X. // Appl. Catal. 80, (1992). P. 99-104.
[8] Lin D., Song C. // Catal. Today. 31 (1996). P. 93-98.
[9] Kovach S.M., Wilson G.D., U.S. Patent 3943053 (1974), to Ashland Oil, Inc.
[10] Yosuda H., Yoshimura Y. // Catal. Lett. 46, (1997). P. 43-47.
[11] Navarro R.M., Pawelec B., Trejo J.M., Mariscal F.R., Fierro J.L.G. // J. Catal. 189 (2000). P. 184-191.
[12] Abu I.I., Smith K.J. // Applied Catalysis A. 328(2007). P. 58-67.
[13] Olivas A., Galvan D.H., Alonso G., Fuentes S. // Applied Catalysis A. 352 (2009). P. 10-16.
[14] Kalpesh B. Sidhpuria, Hasmukh A. Patel, Parimal A. Parikh, Pratap Bahadur, Hari C. Bajoj, Raksh V. Jasra // Applied Clay Science. 42(2009). 386-390.
[15] Sanati M., Harryson B., Faghini M., Gevert B., Jaras S. //J. Catalysis. 16(2002). P. 1-43.
[16] Kabe T., Qian W.H., Hirai Y., Li L., Ishihara A. // J. Catalysis. 190, 191(2000).
[17] Boricha A.B., Mody H.M., Bajaj H.C., Raksh V. // Applied Clay Science. 31(2006). P. 120-129.
[18] Yamanaka S., Brindley G.W. // Clays and Clay Minerals. 27 (1979). P. 119-144.
[19] Krylov О.V. Heterogeneous catalysis. M.: IKS Academbook, 2004. P. 679.
[20] Komarov V.S., Panasjugin A.S., Trofimenko N.E. // Collodial magazine. 57 (1975).P. 51-56.
[21] Korili S.A., Gill A., Korili A., Trujillano R., Vicente M.A. // Pillared clays and related catalysts. Springer, 2010. 522 p.
[22] Magaryl R.Z. Theoretical basics of chemical processes in oil refining. M.: Chemistry, 1976. 312 p.
[23] Cooper B.H., Donnis B.B. // Appl. Catal. A137.1996. 203 p.
[24] Sinfelt J.H. // J. Catal. 29(1973). 308 p.
[25] Charles P. Rader, Hilton A. Smith J. // Am. Chem. Soc. 84 (1962). P. 1443-1449.
[26] Utelbayeva A.B. Chemistry of oil and gas: Nadyrov reading. Almaty, 2010. P. 254-257.
[27] Zhanabaev B.Zh., Zanozina P.P., Utelbayev B.T. // J. Kinetics and Catalysis. 32 (1991). P. 213-215.

Downloads

Published

2021-05-03